دانلود نمونه مثالهای طراحی سازه های فولادی بر اساس آیین نامه آمریکا(AISC Design Examples)
AISC Design Examples
primary objective of these design examples is to provide illustrations
of the use of the 2010 AISC Specification for Structural Steel Buildings
(ANSI/AISC 360-10) and the 14th Edition of the AISC Steel Construction
The design examples provide coverage of all applicable
limit states whether or not a particular limit state controls the
design of the member or connection.
In addition to the examples which
demonstrate the use of the Manual tables, design examples are provided
for connection designs beyond the scope of the tables in the Manual.
These design examples are intended to demonstrate an approach to the
design, and are not intended to suggest that the approach presented is
the only approach. The committee responsible for the development of
these design examples recognizes that designers have alternate
approaches that work best for them and their projects. Design approaches
that differ from those presented in these examples are considered
viable as long as the Specification, sound engineering, and project
specific requirements are satisfied.
Part I of these examples is
organized to correspond with the organization of the Specification. The
Chapter titles match the corresponding chapters in the Specification.
II is devoted primarily to connection examples that draw on the tables
from the Manual, recommended design procedures, and the breadth of the
Specification. The chapters of Part II are labeled II-A, II-B, II-C,
Part III addresses aspects of design that are linked to the
performance of a building as a whole. This includes coverage of lateral
stability and second order analysis, illustrated through a four-story
braced-frame and momentframe building.
The Design Examples are
arranged with LRFD and ASD designs presented side by side, for
consistency with the AISC Manual. Design with ASD and LRFD are based on
the same nominal strength for each element so that the only differences
between the approaches are which set of load combinations from ASCE/SEI
7-10 are used for design and whether the resistance factor for LRFD or
the safety factor for ASD is used.
Design Examples V14.0
AMERICAN INSTITUTE OF STEEL CONSTRUCTION
design examples are intended to illustrate the application of the 2010
AISC Specification for Structural Steel Buildings (ANSI/AISC 360-10)
(AISC, 2010) and the AISC Steel Construction Manual, 14th Edition (AISC,
2011) in low-seismic applications. For information on design
applications requiring seismic detailing, see the AISC Seismic Design
A2. REFERENCED SPECIFICATIONS, CODES AND STANDARDS
Section A2 includes a detailed list of the specifications, codes and standards referenced throughout the AISC Specification.
Section A3 includes a list of the steel materials that are approved for use with the AISC Specification. The
complete ASTM standards for the most commonly used steel materials can be found in Selected ASTM Standards
for Structural Steel Fabrication (ASTM, 2011).
A4. STRUCTURAL DESIGN DRAWINGS AND SPECIFICATIONS
A4 requires that structural design drawings and specifications meet the
requirements in the AISC Code of Standard Practice for Steel Buildings
and Bridges (AISC, 2010b).
DESIGN EXAMPLES Version 14.0
© 2011 by American Institute of Steel Construction All rights reserved.
This publication or any part thereof must not be reproduced in any form
without the written permission of the publisher. The AISC logo is a
registered trademark of AISC.
برای دانلود AISC Design Examples اینجا کلیک کنید...
منبع : ایران سازه
برچسب ها:دانلود رایگان
DESIGN EXAMPLES Version 14
Specification for Structural Steel Buildings
مهندس جواد قربانی
دانلود رایگان پروژه